Product Description
Hearing Loop Braille & Tactile Sign - Modern Range - Silver
Tactile braille signs are a required part of all Australian buildings that have public accessibility access, whether it's a shopping centre or a high rise office complex! This particular braille sign is to be used to indicate rooms which have a hearing loop installed (otherwise known as an audio induction loop), allowing people who have a hearing aid to connect to the audio system and clearly hear communication in the space.
Our modern range of silver braille signs suit buildings with a slick new interior design, instead of the standard iconography we're used to seeing at public restrooms around the country. The simple colour palette will help these signs suit most areas, and as always, these signs meet all applicable Australian standards and are 100% BCA / NCC compliant. Our acrylic braille signs are now all manufactured from 3mm thick low-sheen acrylic for greater rigidity and appeal.
Silver acrylic is an easily-cleanable, cheap alternative to anodised aluminium and stainless steel signs. It is less prone to fingerprints and marking, and comes at a more affordable price point.
All of our signage is 100% Australian owned and Australian made, manufactured right here in our factory in Moorabbin, Victoria.
Translation of Braille:
Hearing loop
Icons:
Hearing loop
Size:
160mm x 190mm
Fixing Methodology:
This sign comes with double sided VHB tape pre-applied to the rear for easy install
Material:
3mm Low-sheen silver acrylic with tactile braille, text and iconography
If you would like to request this sign in an alternative colour, please contact us today and we will organise one for you.
-------------------------------------------------------------------------------------
Installation Information:
The installation of the sign must be between 1200mm and 1600mm above the floor or ground.
If the sign has a single line of characters the tactile characters must be between 1250mm and 1350mm above the floor or ground.
The sign must be located on the wall on the same side as the door handle, and the leading edge of the sign should be located between 50mm and 300mm from the architrave.
If there is insufficient space on the door handle side of the door the sign may be installed on the opposite side.
If it is not possible to install the sign on either side of the door the sign may be installed on the door itself.