Product Description
Accessible Entry Braille & Tactile Sign
Tactile braille signs are a required part of all Australian buildings that have public accessibility access, whether it's a shopping centre or a high rise office complex! This Accessible Entry sign is used to denote the location of an accessible entry point to a building.
The accessible entry sign meets all applicable Australian standards and is 100% BCA / NCC compliant. Our acrylic braille signs are now all manufactured from 3mm thick low-sheen acrylic for greater rigidity and appeal.
All of our signage is 100% Australian owned and Australian made, manufactured right here in our factory in Moorabbin, Victoria.
Translation of Braille:
Accessible entry
Icons:
Accessible icon
Size:
190mm x 210mm
Fixing Methodology:
This sign comes with double sided VHB tape pre-applied to the rear for easy install
Material:
3mm Low-sheen acrylic with tactile braille, text and iconography
This style of sign is also available in white, and can be purchased here.
-------------------------------------------------------------------------------------
Installation Information:
The installation of the sign must be between 1200mm and 1600mm above the floor or ground.
If the sign has a single line of characters the tactile characters must be between 1250mm and 1350mm above the floor or ground.
The sign must be located on the wall on the same side as the door handle, and the leading edge of the sign should be located between 50mm and 300mm from the architrave.
If there is insufficient space on the door handle side of the door the sign may be installed on the opposite side.
If it is not possible to install the sign on either side of the door the sign may be installed on the door itself.
