Product Description
Male Ambulant Toilet Braille & Tactile Sign - Satin Silver Natural Anodised Aluminium Range
This Male Ambulant Toilet braille sign is used to indicate the location of a male toilet which features the necessary grabrails for ambulant use. In large facilities this is normally seen on an ambulant cubicle housed within a male toilet block, although in smaller buildings a standalone male ambulant toilet room is quite common.
Please note that where this ambulant sign is being used to denote a cubicle, another separate sign will also be required on the outside of the toilet block to indicate that there is an ambulant cubicle within. The matching male and male ambulant toilet sign can be purchased from here.
Anodised aluminium is a beautiful, hard-wearing material that is use in many products throughout the interior build and fitout of residential and commercial buildings, and this sign will provide visual continuity in any anodised-heavy fitout. It is available in a wide range of colours and finishes, however all of our anodised aluminium braille signs feature a low sheen satin finish to ensure compliance with building regulations.
We double-prime our anodised aluminium to ensure adhesion of the tactile and braille graphics.
The male ambulant toilet sign meets all applicable Australian standards and is BCA / NCC compliant. Additionally all of our signage is 100% Australian owned and Australian made, manufactured right here in our factory in Moorabbin, Victoria.
Translation of Braille:
Male ambulant toilet
Icons:
Male Ambulant
Size:
230mm x 180mm
Fixing Methodology:
This sign comes with double sided VHB tape pre-applied to the rear for easy install
Material:
1.6mm satin silver anodised aluminium
-------------------------------------------------------------------------------------
Installation Information:
The installation of the sign must be between 1200mm and 1600mm above the floor or ground.
If the sign has a single line of characters the tactile characters must be between 1250mm and 1350mm above the floor or ground.
The sign must be located on the wall on the same side as the door handle, and the leading edge of the sign should be located between 50mm and 300mm from the architrave.
If there is insufficient space on the door handle side of the door the sign may be installed on the opposite side.
If it is not possible to install the sign on either side of the door the sign may be installed on the door itself.
