Product Description
Baby Change Braille & Tactile Sign - Classic Range - Matte Black
Tactile braille signs are a required part of all Australian buildings that have public accessibility access, whether it's a shopping centre or a high rise office complex! This baby change sign is to be used to indicate the location of a baby change table or parents room.
The classic range of braille signs will suit a wide range of corporate interiors with their slick shape and small corner radius. The black and white colour scheme will assist with visibility, and the matte black finish (as opposed to the standard low-sheen satin finish) has a modern aesthetic.
Our acrylic braille signs are now all manufactured from 3mm thick low-sheen acrylic for greater rigidity and appeal.
All of our signage is 100% Australian owned and Australian made, manufactured right here in our factory in Moorabbin, Victoria.
Translation of Braille:
Baby Change
Icons:
Baby
Size:
150mm x 250mm
Fixing Methodology:
This sign comes with double sided VHB tape pre-applied to the rear for easy install
Material:
3mm matte black acrylic with tactile braille, text and iconography
If you would like to request this sign in an alternative colour, please contact us today and we will organise one for you.
-------------------------------------------------------------------------------------
Installation Information:
The installation of the sign must be between 1200mm and 1600mm above the floor or ground.
If the sign has a single line of characters the tactile characters must be between 1250mm and 1350mm above the floor or ground.
The sign must be located on the wall on the same side as the door handle, and the leading edge of the sign should be located between 50mm and 300mm from the architrave.
If there is insufficient space on the door handle side of the door the sign may be installed on the opposite side.
If it is not possible to install the sign on either side of the door the sign may be installed on the door itself.
