Product Description
Baby Change Braille & Tactile Sign - Bamboo Range
This tactile braille sign is used to identify the location of a non-gender-specific baby change room, where parents can go to comfortably and privately change a nappy or otherwise attend to their child's needs.
Bamboo ply has a hardness rating that beats most hardwood timbers and features a lovely finish. The grain runs horizontally and when laser cut has a rich coffee-coloured smooth edge.
Our bamboo signs are made from sustainably-harvested bamboo, making them more eco-friendly than substrates like acrylic or plastic, and they can also be recycled at participating bamboo recyclers (including MPL Signage).
The baby change sign meets all applicable Australian standards and is BCA / NCC compliant. Additionally all of our signage is 100% Australian owned and Australian made, manufactured right here in our factory in Moorabbin, Victoria.
Translation of Braille:
Baby change
Icons:
Baby Icon
Size:
190mm x 210mm
Fixing Methodology:
This sign comes with double sided VHB tape pre-applied to the rear for easy install
Material:
2.5mm matte carbonised narrow grain bamboo panel with tactile braille, text and iconography, or;
2.5mm matte natural narrow grain bamboo panel with tactile braille, text and iconography
-------------------------------------------------------------------------------------
Installation Information:
The installation of the sign must be between 1200mm and 1600mm above the floor or ground.
If the sign has a single line of characters the tactile characters must be between 1250mm and 1350mm above the floor or ground.
The sign must be located on the wall on the same side as the door handle, and the leading edge of the sign should be located between 50mm and 300mm from the architrave.
If there is insufficient space on the door handle side of the door the sign may be installed on the opposite side.
If it is not possible to install the sign on either side of the door the sign may be installed on the door itself.
